Updated October 22, 2026 · 9 min read
A water damage restoration quote in Schenectady is built from the scope: how much water got in, how far it reached, what materials it soaked and how long the drying takes. No single rate applies to every house. The price for each stage is explained and approved on site before the work starts.
Read the guideUpdated October 22, 2026 · 8 min read
After river water reaches a Stockade house, the first steps are to keep people out of the water, cut power to wet rooms, photograph the high-water mark and call for a crew. Floodwater is treated as contaminated, so it is separated from clean water and removed before any drying begins.
Read the guideUpdated October 22, 2026 · 8 min read
In the 2011 flood, aging canal dams could not be raised at several locks, and debris blocked locks and dams, according to a New York State Canal Corporation finding. Water from a canal or a dam can reach property on a different schedule from river water, so its cleanup starts from a different place.
Read the guideUpdated October 22, 2026 · 8 min read
A water damage claim is decided by the insurer under the homeowner's policy, and the policy's terms, endorsements and exclusions control the result. Coverage generally depends on the cause of the water and on whether the owner acted to limit the damage. The New York State Department of Financial Services is the state regulator for insurers.
Read the guideUpdated October 22, 2026 · 8 min read
New York Labor Law Article 32 requires state licenses for mold assessors, mold remediators and abatement workers, with rules effective January 1, 2016, administered by the state Department of Labor. Before any mold work starts, ask which license the person holds, whether it covers the task and how to check it.
Read the guideUpdated October 22, 2026 · 8 min read
Hiring a water damage contractor in New York means asking for a written scope, a drying log with readings, and a clear answer on which licenses the people doing the work hold. This guide does not name a state license for water damage work, so ask the company which credentials it holds and check any number it gives you.
Read the guideUpdated October 22, 2026 · 8 min read
When a supply line bursts, the first hour decides how far the water spreads. Close the main shut-off, cut power to wet outlets and the panel only if it is dry and reachable, photograph the damage and call for extraction. The main shut-off is the step that stops new water from entering the house.
Read the guideUpdated October 22, 2026 · 8 min read
A wall is dry when moisture readings in its framing, plaster and cavity reach the dry standard set at the start of the job, not when the surface looks dry. Plaster and lath hold water differently from drywall, and a dry surface can hide wet framing behind it.
Read the guide